Self-adhesive foil roll wallpaper veneer brick 1.22x50m
FOIL ROLL SELF-ADHESIVE WALLPAPER
BRICK 1.22X50M
NOTE! When you purchase this product, you will receive one roll measuring 1.22X50m.
Do you want to give your home interior a new, unique
expression?
Perhaps you have a scratched windowsill or a scuffed
piece of furniture?
We have the answer to your needs.
Our thermoplastic foil-covered SELF-ADHESIVE BRICK WALLPAPER is a decorative product. It will give your objects a fresh look –
bring them to life! It will perfectly help you personalize your home and break
from the usual patterns. Our foil-covered material is the perfect material for inexpensively
concealing damage and other imperfections.
SELF-ADHESIVE BRICK WALLPAPER is perfect
for giving your home interior a unique character. A stylish finish
will mask any imperfections, hiding scratches, scuffs, and discolorations. The coated surface will take on a unique look, giving
the surroundings a unique atmosphere.
1. Film Features:
Self-adhesive – the film has
a specialized channel adhesive that facilitates application and minimizes
the risk of air bubbles; the film is easy to install,
especially on flat, even surfaces.Easy to correct – you might
think: "What if I apply the film incorrectly?" Don't worry! You can achieve the film's full
strength even within
a dozen or so minutes of first application. In the initial phase, the adhesive is still weak, making it easier for you to correct the error.
... Just apply heat, which will increase its plasticity.Easy to portion – the foil has evenly spaced lines on its inner side, making it easier to cut to the correct size.
Resistant to abrasion, detergents,
and even oils and grease.Easy to clean – just wipe with a damp cloth.
2. Installation Instructions
Tools useful for installing the foil: surface degreaser, scissors, hairdryer, and squeegee. (elements not included)
NOTE! If you want to use a heat gun, remember to keep
the appropriate distance. The same applies to a hairdryer. Too high
temperature can unglue the veneer.
1) Preparing the foil – the foil has
evenly spaced lines on its inside. Based on these lines, cut out
the appropriate piece with scissors. NOTE! It's a good idea to allow 2-3 cm for
folding the foil under the element being
covered.
2) Preparing the surface – thoroughly degrease and wipe the
area where the foil will be placed. It must be clean and dry.
3) Installing the foil – apply the foil gradually,
peeling off the protective paper. For flat surfaces, press down
using a squeegee. However, if you encounter any rounded shapes or irregularities, heat the foil using, for example, a hairdryer. The foil will become pliable and, with a little patience and precision, will allow it to conform to the surface being glued.
4) Eliminating bubbles – the tubular adhesive minimizes the risk of air bubbles. However, if they appear, smooth the foil from the center outwards – you can do this using a squeegee.
5) After installation, the foil does not require heat curing.
3. Using the foil
The foil is primarily recommended for indoor use. It can also be used outdoors.
Most common uses for foil:
As wallpaper, to give walls an exotic look.
Refreshing the appearance of windowsills, wardrobes, chests of drawers, and other furniture.
Concealing damage and other imperfections.
Note! There are places and objects where it's not advisable to stick foil:
Do not stick foil to moving parts – e.g., door hinges –
as the foil may tear.
Do not stick foil to places that get hot – e.g., lamps, oven doors –
as the foil may burn.
4. Specifications
Film Type – SELF-ADHESIVE
Color/Pattern: Brick
Thickness: 145
micronsRoll Dimensions:
1.22x50mChannel Adhesive:
yesThermoplastic:
yesWaterproof: yes
Operating Temperature – from -40°C
to +80°C
NOTE! When you purchase this product, you will receive one roll measuring
1.22x50m.