Self-adhesive foil roll wall covering oak white 1.22x50m
SELF-ADHESIVE FILM ROLL WHITE OAK
1.22X50M
NOTE! When purchasing this product, you will receive one roll measuring
1.22X50m.
Do you want to give your home interior a new, unique
expression?
Perhaps you have a scratched windowsill or a scuffed
piece of furniture?
We have the answer to your needs.
Our thermoplastic SELF-ADHESIVE WHITE OAK veneer foil
is a decorative product. It will give your objects a fresh look – bring them
to life! It will perfectly help you personalize your home and break from the usual
conventions. Our veneer foil is the perfect material for inexpensively concealing
damage and other imperfections.
SELF-ADHESIVE WHITE OAK veneer foil is perfect for giving
your furniture and the interior of your home a unique character. The stylish finish will conceal any imperfections, hiding scratches, scuffs, and discolorations. The wrapped item will take on a unique look,
giving the surroundings a unique atmosphere.
1. Film Features:
Self-adhesive
– the film has a specialized channel adhesive that facilitates application and
minimizes the risk of air bubbles; the film is easy to
install, especially on flat, even surfaces.Easy
to correct – you might be thinking, "What if I apply the film incorrectly?" Don't worry!
You can achieve the film's full strength within just a few minutes of first application. In the initial phase, the adhesive is still weak, making it easier to correct any mistakes.Easy to remove – the foil can be easily removed using warm air; it leaves no adhesive residue.
Flexible and thermoplastic – the foil can be adjusted to various shapes.
Just apply heat, which will increase its plasticity.Easy to cut – the foil has evenly spaced lines on its inside, making it easier to cut to the correct size.
Resistant
to abrasion, detergents, and even oils and grease.Easy
to clean – just wipe with a damp cloth.
2. Installation Instructions
Tools useful for installing the foil: surface degreaser, scissors, hair dryer, and squeegee (not included).
NOTE! If you want to use a heat gun, remember to keep
the appropriate distance. The same applies to hair dryers. Too high a temperature can unglue the veneer.
1) Preparing the foil – the foil has evenly spaced lines on its inside. Based on these lines, cut the appropriate piece with scissors. NOTE! It's a good idea to allow 2-3 cm for the foil to be wrapped under the element being wrapped.
2) Preparing the surface – thoroughly degrease and wipe the area where the foil will be placed. It must be clean and dry.
3) Installing the foil – apply the foil gradually, peeling off the protective paper. For flat surfaces, press down with a squeegee.
However, if you encounter any rounded shapes or irregularities, heat the foil with, for example, a hairdryer. The foil will become pliable and, with a little patience and precision, will allow it to adapt to the surface being wrapped.
4) Bubble Removal – Channel adhesive minimizes the risk of air bubbles. However, if they appear, smooth the foil from the center outwards – you can do this using a squeegee.
5) After installation, the foil does not require heat curing.
3. Foil Use
The foil is primarily recommended for indoor use. It can also be used outdoors.
Most common uses for foil:
as wallpaper, to give walls an exotic look
refreshing the appearance of windowsills, wardrobes, chests of drawers, and other furniture
masking damage and other imperfections
Note! There are places and objects where it's not advisable to stick foil:
Do not stick foil to moving parts – e.g., door hinges –
as the foil may tear.
Do not stick foil to places that get hot – e.g., lamps, oven doors –
as the foil may burn.
4. Specifications
Foil Type – SELF-ADHESIVE
Color/Pattern:
White OakThickness:
175 micronsRoll Dimensions:
1.22x50mChannel Adhesive:
YesThermoplastic:
YesWaterproof:
YesOperating Temperature – -40°C to +80°C
WARNING! When you purchase this product, you will receive one roll measuring 1.22 x 50 m.