Foil roll metallic brushed silver 1.52x30m

BRUSHED SILVER METALIC FOIL ROLL
1.52X30M

NOTE! When you purchase this product, you will receive one roll measuring
1.52X30M.

Would you like to personalize your car's interior? Or maybe

not just the interior?
And not just the car?

Do you have a scratched windowsill or a scuffed piece of furniture?

We have a solution to your problems.

Our thermoplastic BRUSHED SILVER veneer foil is a

decorative product. It will give your objects a fresh look – bring them to life!

It will help you stand out from the crowd and break the mold. Our veneer foil is the perfect material for inexpensively concealing damage and other

imperfections.

BRUSHED foil is perfect for both tuning

your car and adding a unique style to your furniture and home interior. The foil has a distinct, tactile brushed pattern. It will allow you to
mask any imperfections, hiding scratches, scuffs, and discolorations.
The wrapped object will take on a raw look, giving the surroundings a unique
atmosphere.

1. Film Features:

• 
  

  Self-adhesive
  – the film has a specialized channel adhesive that facilitates application and
  minimizes the risk of air bubbles; the film is easy to
  install, especially on flat, even surfaces.



• 
  

  Easy
  
  to correct – you might be thinking, "What if I apply the film incorrectly?" Don't worry!
  
  You can achieve the film's full strength within just a few minutes of first application. In the initial phase, the adhesive is still weak, making it easier to correct any mistakes.
  
  

• 
  

  Easy to remove – the foil can be easily removed using warm air; it leaves no adhesive residue.
  
  

• 
  

  Flexible
  
  and thermoplastic – the foil can be adjusted to various shapes.
  
  Just apply heat to increase its plasticity.
  
  

• 
  

  Easy to cut – the film has evenly spaced lines on its inside, making it easy to cut to the correct size.
  
  



• 
  

  Resistant
  
  to abrasion, detergents, and even oils and grease.
  
  

• 
  

  Easy
  
  to clean – just wipe with a damp cloth.
  
  

2. Installation Instructions.

Tools useful for installing the film: surface degreaser, scissors, hair dryer, and squeegee. (not included)

NOTE! If you want to use a heat gun, remember to keep

the appropriate distance. The same applies to a hairdryer. Too high

temperature can unglue the veneer.

1. 
   

   Preparing
   
   the foil – the foil has evenly spaced lines on its inside.
   
   Cut the appropriate piece with scissors based on these lines. NOTE! It's a good idea
   
   to allow 2-3 cm for folding the foil under the element being veneered.



2. 
   

   Preparing
   
   the surface – thoroughly degrease and wipe the area where the foil will be placed.
   
   It must be clean and dry.



3. 
   

   Installing
   
   the foil – apply the foil gradually, peeling off the protective paper. For flat surfaces, press down with a squeegee. However, if you encounter rounded shapes or irregularities, heat the foil using, for example, a hair dryer. The foil will become pliable and, with a little patience and precision, will allow it to adapt to the surface being glued.



4. 
   

   Removing bubbles – the channel adhesive minimizes the risk of air bubbles. However, if they appear, smooth the foil from the center outwards – you can do this with a squeegee.



5. 
   

   After installation, the foil does not require heat curing.

3. Using the foil

The foil is primarily recommended for indoor use. It can also be used outdoors.

Most common uses for foil:

• 
  

  visual
  
  car tuning



• 
  

  refreshing
  
  the appearance of a laptop, windowsill, phone, or bicycle



• 
  

  masking
  
  damage and other imperfections

Note! There are places and objects where it is not advisable to stick the foil:

Do not stick it to moving parts – e.g., door hinges –
as the foil may tear.

Do not stick it to places that get hot – e.g., exhaust pipes, lamps, oven doors – as the foil may burn.

4. Specifications

• 
  

  Foil Type – BRUSHED



• 
  

  Color:
  
  Silver



• 
  

  Thickness
  
  – 140 microns



• 
  

  Roll Dimensions – 1.52x30m



• 
  

  Channel Adhesive:
  
  yes



• 
  

  External:
  
  yes



• 
  

  Thermoplastic:
  
  yes



• 
  

  Waterproof:
  
  Yes



• 
  

  Operating temperature – -40°C to +80°C

NOTE! When you purchase this product, you will receive one roll measuring 1.52x30m.