Foil roll metallic polished black 1.52x30m
BRUSHED BLACK FILM ROLL 1.52X30M
ATTENTION! When you purchase this product, you will receive one roll measuring
1.52X30M.
Would you like to personalize the interior of your car? Or maybe
not just the interior?
And not just the car?
Do you have a scratched windowsill or a scuffed piece of furniture?
We have a solution to your problems.
Our BRUSHED BLACK thermoplastic foil is a decorative product. It will give your objects a fresh look – bring them to life!
It will help you stand out from the crowd and break the mold. Our foil is the perfect material for inexpensively concealing damage and other imperfections.
BRUSHED foil is perfect for both tuning your car and giving your furniture and home interior a unique style. The foil has a distinct, tactile brushed pattern. It will allow you to
mask any imperfections, hiding scratches, scuffs, and discoloration.
The wrapped object will take on a raw look, giving the surroundings a unique
atmosphere.
1. Film Properties:
Self-adhesive – the film has
a specialized channel adhesive that facilitates application and minimizes
the risk of air bubbles; the film is easy to install,
especially on flat, even surfaces.Easy to correct – you might
be thinking: "What if I apply the film incorrectly?" Don't worry! You can achieve the film's full
strength within just a few minutes
after the first application. In the initial phase, the adhesive is still weak, making it easier for you to correct the error.
... Just apply heat to increase its plasticity.Easy to portion – the foil has evenly spaced lines on its inner side, making it easier to cut to the correct size.
Resistant to abrasion, detergents,
and even oils and grease.Easy to clean – just wipe with a damp cloth.
2. Installation Instructions.
Tools needed for installing the foil: surface degreaser, scissors, hair dryer, and squeegee. (not included)
WARNING! If you want to use a heat gun, remember to keep
the appropriate distance. The same applies to a hairdryer. Too high
temperature can unglue the veneer.
1) Preparing the foil – the foil has
evenly spaced lines on its inside. Based on these lines, cut out
the appropriate piece with scissors. NOTE! It's a good idea to include 2-3 cm for
folding the foil under the element being
covered.
2) Preparing the surface – thoroughly degrease and wipe the
area where the foil will be placed. It must be clean and dry.
3) Installing the foil – apply the foil gradually,
peeling off the protective paper. For flat surfaces, press down with a squeegee.
However, if you encounter any rounded or irregular shapes, heat the foil
using a hairdryer, for example. The foil will become pliable and, with a little patience and precision, will allow it to adapt to the surface being glued.
4) Eliminating bubbles – the tubular adhesive minimizes the risk of air bubbles. However, if they appear, smooth the foil from the center outwards – you can do this with a squeegee.
5) After installation, the foil does not require heat curing.
3. Using the foil
The foil is primarily recommended for indoor use. It can also be used outdoors.
Most common uses for foil:
visual tuning
of a carrefreshing the appearance of a laptop,
window sill, phone, or bicycleconcealing damage
and other imperfections
Note! There are places and objects where it is not advisable to stick the foil:
Do not stick it to moving parts – e.g., door hinges –
as the foil may tear.
Do not stick it to places that get hot – e.g., exhaust pipes, lamps, oven doors – as the foil may burn.
4. Specifications
Film Type – BRUSHED
Color: Black
Thickness – 155 microns
Roll Dimensions – 1.52x30m
Channel Adhesive:
yesExternal: yes
Thermoplastic:
yesWaterproof: yes
Operating temperature – from -40°C
to +80°C
NOTE! When purchasing this product, you will receive one roll measuring
1.52x30m.