Carbon 5D roll film black 1.52x18m

5D CARBON FILM ROLL
BLACK 1.52x18m

NOTE! When you purchase this product, you will receive one roll measuring

1.52x18m.

Would you like to personalize your car's interior? Or maybe

not just the interior?
And not just the car?

Do you have a scratched windowsill or a scuffed piece of furniture?

We have a solution to your problems.

Our thermoplastic CARBON 5D BLACK wrapping film is a

decorative product. It will give your objects a fresh look – bring them to life!

It will perfectly help you stand out from the crowd and break the mold. Our wrapping film is the perfect material for inexpensively concealing damage and other

imperfections.

CARBON wrapping film is an increasingly popular material used

for visual car tuning. It is used both inside and

outside cars. It looks like real carbon fiber – a durable material

with low weight. It will give your car an indestructible look while

maintaining its lightness.

Carbon wrapping foil is also perfect for wrapping:

motorcycles, laptops, phones, tablets... or bicycles and scooters. In fact,

the only limit to the foil's use.

1. Foil Features:

• 
  

  Self-adhesive
  
  – the foil has a specialized channel adhesive that facilitates adhesion and
  minimizes the risk of air bubbles; the foil is easy to
  
  install, especially on flat, even surfaces.



• 
  

  Easy
  
  to correct – you might be thinking, "What if I apply the foil incorrectly?" Don't worry!
  
  You can achieve the foil's full strength within just a few minutes of first application. In the initial phase, the adhesive is still weak, making it easier to correct any mistakes.
  
  

• 
  

  Easy to remove – the foil can be easily removed using warm air; it leaves no adhesive residue.
  
  

• 
  

  Flexible
  
  and thermoplastic – the foil can be adjusted to various shapes.
  
  Just apply heat to increase its plasticity.
  
  

• 
  

  Easy
  
  to portion – the foil has evenly spaced lines on its inside, making it easy to cut to the right size.
  
  



• 
  

  Resistant
  
  to abrasion, detergents, and even oils and greases.
  
  

• 
  

  Easy
  
  to clean – just wipe with a damp cloth.
  
  

• 
  

  Has a
  
  structure that looks like real carbon fiber.
  
  

2. Installation Instructions

Tools useful for installing the foil: surface degreaser, scissors, hair dryer, and squeegee. (not included)

NOTE! If you want to use a heat gun, remember to keep

the appropriate distance. The same applies to a hair dryer. Too high

temperature can unglue the foil.

1. 
   

   Preparing
   
   the foil – the foil has evenly spaced lines on its inside.
   
   Based on these lines, cut the appropriate piece with scissors. NOTE! It's a good idea
   
   to allow 2-3 cm for the foil to wrap under the element being covered.



2. 
   

   Preparing
   
   the surface – thoroughly degrease and wipe the area where the foil will be placed. It must be clean and dry.



3. 
   

   Installing
   the foil – apply the foil gradually, peeling off the protective paper. For flat surfaces, press it down using a squeegee. However, if
   you encounter any rounded shapes or irregularities, heat the foil using, for example,
   a hair dryer. The foil will become pliable and, with a little patience and precision,
   will allow it to adapt to the surface being glued.



4. 
   

   Removing
   bubbles – the channel adhesive minimizes the risk of air bubbles. However, if they appear, smooth the foil from the center outwards – you can do this using a squeegee.



5. 
   

   After
   installation, the foil does not require heat curing.

3. Foil Uses

The foil is primarily recommended for interior use. It can also be used outdoors.

Most common uses for foil:

• 
  

  visual
  car tuning



• 
  

  refreshing
  the appearance of a laptop, windowsill, phone, or bicycle



• 
  

  concealing
  damage and other imperfections

Note! There are places and objects where it is not advisable to stick the foil:

Do not stick it to moving parts – e.g., door hinges –
as the foil may tear.

Do not stick it to places that get hot – e.g., exhaust pipes, lamps, oven doors – as the foil may burn.

4. Specifications

• 
  

  Foil Type – CARBON



• 
  

  Color:
  
  Black



• 
  

  Thickness
  – 230 microns



• 
  

  Roll Dimensions – 1.52x18m
  
  



• 
  

  Channel Adhesive:
  
  yes



• 
  

  External:
  
  yes



• 
  

  Thermoplastic:
  
  yes



• 
  

  Waterproof:
  
  Yes



• 
  

  Operating temperature – -40°C to +80°C

NOTE! When you purchase this product, you will receive one roll measuring 1.52x18m.