Carbon 3D transparent foil roll 1.27x28m

FOIL ROLL CARBON 3D TRANSPARENT 1.27X28M

ATTENTION! When you purchase this product, you will receive one roll measuring

1.27x28m.

Do you want to give your home interior a new, unique

expression?

We have the answer to your needs.

Our thermoplastic, SELF-ADHESIVE CARBON 3D TRANSPARENT foil is a decorative product. It will give your objects a fresh look –

bring them to life! It will perfectly help you personalize your home and break

from the usual patterns. Our foil is the perfect material for inexpensively

concealing damage and other imperfections. This clear foil with an interesting pattern will enhance the look of any item!

The CARBON 3D TRANSPARENT SELF-ADHESIVE foil is perfect

for giving your furniture and home interior a unique character. The stylish finish will unify the texture

and color of the surface, allowing you to mask any imperfections,

hiding scratches, scuffs, and discoloration. The wrapped item will take on a unique

appearance, giving the surroundings a unique atmosphere.

1. Foil Features:

• 
  

  Self-adhesive
  
  – the foil has a specialized channel adhesive that facilitates application and
  
  minimizes the risk of air bubbles; The foil is easy to install, especially on flat, even surfaces.



• 
  

  Easy
  to correct – you might be thinking, "What if I apply the foil incorrectly?" Don't worry!
  
  Even within a few minutes of first application, you can
  
  achieve the foil's full strength. In the initial phase, the adhesive is still weak, making it easier to correct the mistake.



• 
  

  Easy
  to remove – the foil can be easily removed using warm air; it leaves no adhesive residue.



• 
  

  Flexible
  
  and thermoplastic – the foil can be adapted to various shapes. Just apply heat to increase its plasticity.



• 
  

  Easy to cut – the film has evenly spaced lines on its inside, making it easy to cut to the correct size.
  
  



• 
  

  Resistant
  
  to abrasion, detergents, and even oils and grease.



• 
  

  Easy
  
  to clean – just wipe with a damp cloth.

2. Installation Instructions

Tools useful for installing the film: surface degreaser, scissors, hair dryer, and squeegee. (not included)

NOTE! If you want to use a heat gun, remember to keep

the appropriate distance. The same applies to a hairdryer. Too high

temperature can unglue the veneer.

1. 
   

   Preparing
   
   the foil – the foil has evenly spaced lines on its inside.
   
   Cut the appropriate piece with scissors based on these lines. NOTE! It's a good idea
   
   to allow 2-3 cm for folding the foil under the element being veneered.



2. 
   

   Preparing
   
   the surface – thoroughly degrease and wipe the area where the foil will be placed.
   
   It must be clean and dry.



3. 
   

   Installing
   
   the foil – apply the foil gradually, peeling off the protective paper. For flat surfaces, press down with a squeegee. However, if you encounter rounded shapes or irregularities, heat the foil using, for example, a hair dryer. The foil will become pliable and, with a little patience and precision, will allow it to adapt to the surface being glued.



4. 
   

   Removing bubbles – the channel adhesive minimizes the risk of air bubbles. However, if they appear, smooth the foil from the center outwards – you can do this with a squeegee.



5. 
   

   After installation, the foil does not require heat curing.

3. Using the foil

The foil is primarily recommended for indoor use. It can also be used outdoors.

Most common uses for foil:

• 
  

  as wallpaper, to give walls an exotic look



• 
  

  refreshing the appearance
  
  of windowsills, wardrobes, chests of drawers, and other furniture



• 
  

  concealing
  
  damage and other imperfections

Note! There are places and objects where it is not advisable to stick the foil:

Do not stick it to moving parts – e.g., door hinges –
as the foil may tear.

Do not stick it to places that get hot – e.g., lamps, oven doors –
as the foil may burn.

4. Specifications

• 
  

  Foil Type – SELF-ADHESIVE



• 
  

  Thickness:



• 
  

  Roll Dimensions: 1.27x28m



• 
  

  Channel adhesive: yes



• 
  

  Thermoplastic:
  
  yes



• 
  

  Waterproof:
  
  yes



• 
  

  Operating temperature – -40°C to +80°C

NOTE! When purchasing this product, you will receive one roll measuring

1.27x28m.