Acquaer EKJ-1002I Garden jet pump with cast iron housing

The EKJ-1002I is a self-priming garden jet pump with a 1000W motor and cast iron housing, which offers a reliable solution for transporting clean water from drilled or ring wells, rainwater collection barrels or ponds. Their main area of application is sprinkler or flood irrigation of green areas and gardens, draining garden ponds or pools, but it is also suitable for providing water supply to a household. The pump has a robust construction and is easy to transport thanks to the carrying handle and its light weight. The motor is equipped with overload protection and a 1.5m power cable. It is easy to put into operation, and the ON/OFF switch is protected from splashing water. The stable tightness of the device is ensured by an axial mechanical seal with a ceramic insert. A constant water supply is required for the mechanical seal to function, therefore dry running of the system must be avoided. For dry-running protection, we recommend using our electromagnetic switch PS01-A or PS01-B. The pump has a G1” (30.3mm) internal threaded connection on the suction and discharge sides. In order to achieve the highest possible water delivery, we recommend using a 1” (25mm) diameter suction pipe with a non-return valve on the suction side (available in our accessories range), and a 3” (19mm) internal diameter sprinkler pipe on the discharge side. One of the main advantages of the jet pump is its self-priming ability, so it is enough to fill the system when starting up and if the suction side is properly closed, refilling will only rarely be necessary to maintain a continuous water column. Another advantage of the jet system pump is that it can suck water from a relative depth of up to 7m (from a well, lake) and transmit it at a relatively high pressure of 3.5..4.8bar, depending on the engine power. (This pressure corresponds to a delivery height of between 35…48m, and depending on the circumstances, it may be suitable for operating about three sprinkler heads.)