OSRAM TYRE seal, 450 Tyre sealant, OTSB450

OSRAM TYREseal 450
The OSRAM TYREseal 450 is a tyre sealant that can be used as a replacement for the manufacturer's original tyre sealant set. The OSRAM TYREseal 450 enables you to seal punctures up to 6 mm using the latest particle gel technology and then re-inflate your tyre with a tyre compressor such as the OSRAM TYREinflate 200, 450 or 1000. After sealing your tyre with the OSRAM TYREseal 450, you can continue your journey up to a distance of 200 km to get a replacement tyre from a garage or tyre dealer or, as the tyre sealant can be rinsed out again, to have the tyre permanently repaired instead of buying a new one, thus saving costs. Sealing a damaged tyre can be done quickly and easily, without tools or jacks, so you can resume your journey within 10 minutes.
Compared to foam sealants, OSRAM's sealant formula is designed to be compatible with the vehicle's tyre pressure monitoring system (TMPS). Thanks to the valve passage technology, the valve insert does not have to be removed when using the sealant.
The OSRAM TYREseal 450 can be used as a replacement for the manufacturer's original tyre sealant. As most tyre sealants have to be replaced every 5 years, including those supplied ex works in the car, the OSRAM TYREseal 450 replacement bottle is an ideal way to replace the tyre sealant in the car after the expiry date and, in the event of a tyre puncture, to seal it and continue driving.
The OSRAM TYREseal 450 and the OSRAM TYREseal KIT are tyre sealants from OSRAM that use particle gel technology to seal tyre punctures and are produced according to the OE standard of the car manufacturers. Available as a set, i.e. as OSRAM TYREseal KIT with sealant, tyre compressor and storage bag or as OSRAM TYREseal 450, i.e. as a tyre sealant replacement bottle.
*The tyre sealant cannot be used to repair damage to the sidewall of a tyre
OSRAM TyreSeal 450 and OSRAM TYREseal Kit is a range of tyre sealants from OSRAM that uses particle gel sealing technology to repair punctures. The OSRAM TyreSeal sealant is produced according to the same original standard of the car manufacturers and is also compatible with these sealing kits. Available as a set with sealant and tyre compressor or as a replacement bottle.
Areas of application: Tyre sealant
Application advice:
For more detailed application information and graphics please see product datasheet and user instruction.
Safety advice:
Product won't exceed noise levels of more than 90 dB
TPMS suitable
Made to OE specification
No tools required
Quick seal
1. Made with Particle Gel Sealant technology
2. Drive up to 200 km after sealing process has been completed
3. No need for jacks or tools
4. Universal bottle design
5. No toxic solvent
Applicable with TPMS valves
Replacement for the cars original tyre sealant
No need to remove the valve core
Be on the road within 10 minutes
1. To seal tyre punctures up to 6 mm wide
2. Enabling you to complete your journey or get to a service centre for a permanent fix.
3. Straight forward convenient and simple to use
4. Suitable to be used with most tyre inflators, including OSRAMs own range of tyre inflators
5. Can be rinsed out, if required, to allow for a permanent repair if required.
Order reference: OTSB450